HL7中国FHIR Connectathon测试实施指南
2025.3.12 - release

HL7中国FHIR Connectathon测试实施指南 - Local Development build (v2025.3.12) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: CoreInpatientEncounter - Detailed Descriptions

Draft as of 2025-03-11

Definitions for the core-inpatient-encounter resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Encounter
Definition

An interaction between a patient and healthcare provider(s) for the purpose of providing healthcare service(s) or assessing the health status of a patient. Encounter is primarily used to record information about the actual activities that occurred, where Appointment is used to record planned activities.

Short住院就诊服务本地化定义An interaction during which services are provided to the patient
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate NamesVisit
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Encounter.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Encounter.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. Encounter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Encounter.identifier
Definition

Identifier(s) by which this encounter is known.

ShortIdentifier(s) by which this encounter is known
NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..*
TypeIdentifier
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Encounter.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ system
  • 10. Encounter.identifier:BID
    Slice NameBID
    Definition

    Identifier(s) by which this encounter is known.

    Short住院记录业务表单编号Identifier(s) by which this encounter is known
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control10..1*
    TypeIdentifier
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Encounter.identifier:BID.use
    Definition

    The purpose of this identifier.

    Shortusual | official | temp | secondary | old (If known)
    Comments

    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

    Control0..1
    BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|5.0.0
    (required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0)

    Identifies the purpose for this identifier, if known .

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Encounter.identifier:BID.system
    Definition

    Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

    ShortThe namespace for the identifier value
    Comments

    Identifier.system is always case sensitive.

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

    Pattern Valueurn:uuid:2.16.156.10011.1.10
    Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Encounter.status
    Definition

    住院服务的状态。住院过程中状态值为in-progress,患者离开医院后状态值应该为discharged,病案归档后应为completed


    The current state of the encounter (not the state of the patient within the encounter - that is subjectState).

    Short住院服务的状态planned | in-progress | on-hold | discharged | completed | cancelled | discontinued | entered-in-error | unknown
    Comments

    Note that internal business rules will determine the appropriate transitions that may occur between statuses (and also classes).

    Control1..1
    BindingThe codes SHALL be taken from EncounterStatushttp://hl7.org/fhir/ValueSet/encounter-status|5.0.0
    (required to http://hl7.org/fhir/ValueSet/encounter-status|5.0.0)

    Current state of the encounter.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Encounter.class
    Definition

    Concepts representing classification of patient encounter such as ambulatory (outpatient), inpatient, emergency, home health or others due to local variations.

    Short就诊活动的类型,固定为IMP(住院)Classification of patient encounter context - e.g. Inpatient, outpatient
    Control10..1*
    BindingThe codes SHOULD be taken from Encounter classhttp://terminology.hl7.org/ValueSet/encounter-class
    (preferred to http://terminology.hl7.org/ValueSet/encounter-class)

    Classification of the encounter.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
        "code" : "IMP"
      }]
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Encounter.serviceType
    Definition

    Broad categorization of the service that is to be provided (e.g. cardiology).

    Short住院科室类型Specific type of service
    Control10..1*
    BindingFor example codes, see ServiceTypehttp://hl7.org/fhir/ValueSet/service-type
    (example to http://hl7.org/fhir/ValueSet/service-type)
    TypeCodeableReference(HealthcareService)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Encounter.subject
    Definition

    The patient or group related to this encounter. In some use-cases the patient MAY not be present, such as a case meeting about a patient between several practitioners or a careteam.

    Short指向住院就诊活动中的患者The patient or group related to this encounter
    Comments

    While the encounter is always about the patient, the patient might not actually be known in all contexts of use, and there may be a group of patients that could be anonymous (such as in a group therapy for Alcoholics Anonymous - where the recording of the encounter could be used for billing on the number of people/staff and not important to the context of the specific patients) or alternately in veterinary care a herd of sheep receiving treatment (where the animals are not individually tracked).

    Control10..1
    TypeReference(Patient, Group)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Alternate Namespatient
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Encounter.serviceProvider
    Definition

    The organization that is primarily responsible for this Encounter's services. This MAY be the same as the organization on the Patient record, however it could be different, such as if the actor performing the services was from an external organization (which may be billed seperately) for an external consultation. Refer to the colonoscopy example on the Encounter examples tab.

    Short住院活动的责任机构,指向患者的就诊机构The organization (facility) responsible for this encounter
    Control10..1
    TypeReference(Organization)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Encounter.participant
    Definition

    The list of people responsible for providing the service.

    ShortList of participants involved in the encounter
    Comments

    Any Patient or Group present in the participation.actor must also be the subject, though the subject may be absent from the participation.actor for cases where the patient (or group) is not present, such as during a case review conference.

    Control10..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    enc-1: A type must be provided when no explicit actor is specified (actor.exists() or type.exists())
    enc-2: A type cannot be provided for a patient or group participant (actor.exists(resolve() is Patient or resolve() is Group) implies type.exists().not())
    SlicingThis element introduces a set of slices on Encounter.participant. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ type
    • 28. Encounter.participant.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      30. Encounter.participant.type
      Definition

      Role of participant in encounter.

      ShortRole of participant in encounter
      Comments

      The participant type indicates how an individual actor participates in an encounter. It includes non-practitioner participants, and for practitioners this is to describe the action type in the context of this encounter (e.g. Admitting Dr, Attending Dr, Translator, Consulting Dr). This is different to the practitioner roles which are functional roles, derived from terms of employment, education, licensing, etc.

      Control0..*
      This element is affected by the following invariants: enc-1, enc-2
      BindingUnless not suitable, these codes SHALL be taken from ParticipantTypehttp://hl7.org/fhir/ValueSet/encounter-participant-type
      (extensible to http://hl7.org/fhir/ValueSet/encounter-participant-type)

      Role of participant in encounter.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Encounter.participant.actor
      Definition

      Person involved in the encounter, the patient/group is also included here to indicate that the patient was actually participating in the encounter. Not including the patient here covers use cases such as a case meeting between practitioners about a patient - non contact times.

      ShortThe individual, device, or service participating in the encounter
      Comments

      For planning purposes, Appointments may include a CareTeam participant to indicate that one specific person from the CareTeam will be assigned, but that assignment might not happen until the Encounter begins. Hence CareTeam is not included in Encounter.participant, as the specific individual should be assigned and represented as a Practitioner or other person resource.

      Similarly, Location can be included in Appointment.participant to assist with planning. However, the patient location is tracked on the Encounter in the Encounter.location property to allow for additional metadata and history to be recorded.

      The role of the participant can be used to declare what the actor will be doing in the scope of this encounter participation.

      If the individual is not specified during planning, then it is expected that the individual will be filled in at a later stage prior to the encounter commencing.

      Control0..1
      This element is affected by the following invariants: enc-1, enc-2
      TypeReference(Patient, Group, RelatedPerson, Practitioner, PractitionerRole, Device, HealthcareService)
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Encounter.participant:AUT
      Slice NameAUT
      Definition

      The list of people responsible for providing the service.

      Short住院医师List of participants involved in the encounter
      Comments

      Any Patient or Group present in the participation.actor must also be the subject, though the subject may be absent from the participation.actor for cases where the patient (or group) is not present, such as during a case review conference.

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      enc-1: A type must be provided when no explicit actor is specified (actor.exists() or type.exists())
      enc-2: A type cannot be provided for a patient or group participant (actor.exists(resolve() is Patient or resolve() is Group) implies type.exists().not())
      36. Encounter.participant:AUT.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      38. Encounter.participant:AUT.type
      Definition

      Role of participant in encounter.

      Short住院记录的作者,指代住院医师Role of participant in encounter
      Comments

      The participant type indicates how an individual actor participates in an encounter. It includes non-practitioner participants, and for practitioners this is to describe the action type in the context of this encounter (e.g. Admitting Dr, Attending Dr, Translator, Consulting Dr). This is different to the practitioner roles which are functional roles, derived from terms of employment, education, licensing, etc.

      Control10..*
      This element is affected by the following invariants: enc-1, enc-2
      BindingUnless not suitable, these codes SHALL be taken from ParticipantTypehttp://hl7.org/fhir/ValueSet/encounter-participant-type
      (extensible to http://hl7.org/fhir/ValueSet/encounter-participant-type)

      Role of participant in encounter.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Pattern Value{
        "coding" : [{
          "system" : "http://hl7.org/fhir/CodeSystem/encounter-participant-type",
          "code" : "AUT"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      40. Encounter.participant:AUT.actor
      Definition

      Person involved in the encounter, the patient/group is also included here to indicate that the patient was actually participating in the encounter. Not including the patient here covers use cases such as a case meeting between practitioners about a patient - non contact times.

      Short指向住院医师的引用The individual, device, or service participating in the encounter
      Comments

      For planning purposes, Appointments may include a CareTeam participant to indicate that one specific person from the CareTeam will be assigned, but that assignment might not happen until the Encounter begins. Hence CareTeam is not included in Encounter.participant, as the specific individual should be assigned and represented as a Practitioner or other person resource.

      Similarly, Location can be included in Appointment.participant to assist with planning. However, the patient location is tracked on the Encounter in the Encounter.location property to allow for additional metadata and history to be recorded.

      The role of the participant can be used to declare what the actor will be doing in the scope of this encounter participation.

      If the individual is not specified during planning, then it is expected that the individual will be filled in at a later stage prior to the encounter commencing.

      Control0..1
      This element is affected by the following invariants: enc-1, enc-2
      TypeReference(Practitioner, Patient, Group, RelatedPerson, PractitionerRole, Device, HealthcareService)
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      42. Encounter.actualPeriod
      Definition

      The actual start and end time of the encounter.

      Short住院活动的起止时间The actual start and end time of the encounter
      Comments

      If not (yet) known, the end of the Period may be omitted.

      Control10..1
      TypePeriod
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      44. Encounter.reason
      Definition

      The list of medical reasons that are expected to be addressed during the episode of care.

      Short住院就诊的原因,一般可以罗列一些症状或问题The list of medical reasons that are expected to be addressed during the episode of care
      Comments

      The reason communicates what medical problem the patient has that should be addressed during the episode of care. This reason could be patient reported complaint, a clinical indication that was determined in a previous encounter or episode of care, or some planned care such as an immunization recommendation. In the case where you have a primary reason, but are expecting to also address other problems, you can list the primary reason with a use code of 'Chief Complaint', while the other problems being addressed would have a use code of 'Reason for Visit'.

      Examples:

      • pregnancy would use HealthcareService or a coding as the reason
      • patient home monitoring could use Condition as the reason
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      46. Encounter.reason.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      48. Encounter.reason.value
      Definition

      Reason the encounter takes place, expressed as a code or a reference to another resource. For admissions, this can be used for a coded admission diagnosis.

      Short住院就诊的原因,一般可以罗列一些症状或问题。可以指向一个记录了症状或问题的Condition资源,也可以直接以编码方式记录症状。Reason the encounter takes place (core or reference)
      Control10..1*
      BindingThe codes SHOULD be taken from EncounterReasonCodeshttp://hl7.org/fhir/ValueSet/encounter-reason
      (preferred to http://hl7.org/fhir/ValueSet/encounter-reason)

      Reason why the encounter takes place.

      TypeCodeableReference(Condition, DiagnosticReport, Observation, ImmunizationRecommendation, Procedure)
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Alternate NamesIndication, Admission diagnosis
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      50. Encounter.diagnosis
      Definition

      The list of diagnosis relevant to this encounter.

      Short住院诊断。最少应填写一个入院诊断。The list of diagnosis relevant to this encounter
      Comments

      Also note that for the purpose of billing, the diagnoses are recorded in the account where they can be ranked appropriately for how the invoicing/claiming documentation needs to be prepared.

      Control10..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      52. Encounter.diagnosis.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      54. Encounter.diagnosis.condition
      Definition

      The coded diagnosis or a reference to a Condition (with other resources referenced in the evidence.detail), the use property will indicate the purpose of this specific diagnosis.

      Short住院诊断,可以指向一个记录了诊断的Condition资源,也可以直接以编码方式表示诊断。The diagnosis relevant to the encounter
      Control10..1*
      BindingFor example codes, see ConditionProblemDiagnosisCodeshttp://hl7.org/fhir/ValueSet/condition-code
      (example to http://hl7.org/fhir/ValueSet/condition-code)
      TypeCodeableReference(Condition)
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Alternate NamesAdmission diagnosis, discharge diagnosis, indication
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      56. Encounter.diagnosis.use
      Definition

      Role that this diagnosis has within the encounter (e.g. admission, billing, discharge …).

      Short住院诊断类型。例如:入院诊断、出院诊断、手术诊断等Role that this diagnosis has within the encounter (e.g. admission, billing, discharge …)
      Control10..1*
      BindingThe codes SHOULD be taken from DiagnosisRolehttp://hl7.org/fhir/ValueSet/encounter-diagnosis-use
      (preferred to http://terminology.hl7.org/ValueSet/diagnosis-role)
      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      58. Encounter.admission
      Definition

      Details about the stay during which a healthcare service is provided.

      This does not describe the event of admitting the patient, but rather any information that is relevant from the time of admittance until the time of discharge.

      ShortDetails about the admission to a healthcare service
      Comments

      An Encounter may cover more than just the inpatient stay. Contexts such as outpatients, community clinics, and aged care facilities are also included.

      The duration recorded in the period of this encounter covers the entire scope of this admission record.

      Control10..1
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      60. Encounter.admission.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      62. Encounter.admission.admitSource
      Definition

      From where patient was admitted (physician referral, transfer).

      Short入院来源From where patient was admitted (physician referral, transfer)
      Control10..1
      BindingThe codes SHOULD be taken from AdmitSourcehttp://hl7.org/fhir/ValueSet/encounter-admit-source
      (preferred to http://hl7.org/fhir/ValueSet/encounter-admit-source)

      From where the patient was admitted.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      64. Encounter.location
      Definition

      List of locations where the patient has been during this encounter.

      Short记录患者入院后所处的位置,一般记录到病床级。List of locations where the patient has been
      Comments

      Virtual encounters can be recorded in the Encounter by specifying a location reference to a location of type "kind" such as "client's home" and an encounter.class = "virtual".

      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      66. Encounter.location.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      68. Encounter.location.location
      Definition

      The location where the encounter takes place.

      ShortLocation the encounter takes place
      Control1..1
      TypeReference(Location)
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. Encounter
      Short住院就诊服务本地化定义
      2. Encounter.identifier
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control1..?
      SlicingThis element introduces a set of slices on Encounter.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ system
      • 4. Encounter.identifier:BID
        Slice NameBID
        Short住院记录业务表单编号
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control1..1
        6. Encounter.identifier:BID.system
        Control1..?
        Pattern Valueurn:uuid:2.16.156.10011.1.10
        8. Encounter.status
        Definition

        住院服务的状态。住院过程中状态值为in-progress,患者离开医院后状态值应该为discharged,病案归档后应为completed

        Short住院服务的状态
        10. Encounter.class
        Short就诊活动的类型,固定为IMP(住院)
        Control1..1
        Pattern Value{
          "coding" : [{
            "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
            "code" : "IMP"
          }]
        }
        12. Encounter.serviceType
        Short住院科室类型
        Control1..1
        BindingFor example codes, see ServiceType
        (example to http://hl7.org/fhir/ValueSet/service-type)
        14. Encounter.subject
        Short指向住院就诊活动中的患者
        Control1..?
        16. Encounter.serviceProvider
        Short住院活动的责任机构,指向患者的就诊机构
        Control1..?
        18. Encounter.participant
        Control1..?
        SlicingThis element introduces a set of slices on Encounter.participant. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ type
        • 20. Encounter.participant:AUT
          Slice NameAUT
          Short住院医师
          Control1..1
          22. Encounter.participant:AUT.type
          Short住院记录的作者,指代住院医师
          Control1..?
          Pattern Value{
            "coding" : [{
              "system" : "http://hl7.org/fhir/CodeSystem/encounter-participant-type",
              "code" : "AUT"
            }]
          }
          24. Encounter.participant:AUT.actor
          Short指向住院医师的引用
          TypeReference(Practitioner)
          26. Encounter.actualPeriod
          Short住院活动的起止时间
          Control1..?
          28. Encounter.reason
          Short住院就诊的原因,一般可以罗列一些症状或问题
          Must Supporttrue
          30. Encounter.reason.value
          Short住院就诊的原因,一般可以罗列一些症状或问题。可以指向一个记录了症状或问题的Condition资源,也可以直接以编码方式记录症状。
          Control1..1
          32. Encounter.diagnosis
          Short住院诊断。最少应填写一个入院诊断。
          Control1..?
          34. Encounter.diagnosis.condition
          Short住院诊断,可以指向一个记录了诊断的Condition资源,也可以直接以编码方式表示诊断。
          Control1..1
          36. Encounter.diagnosis.use
          Short住院诊断类型。例如:入院诊断、出院诊断、手术诊断等
          Control1..1
          BindingThe codes SHOULD be taken from DiagnosisRole
          (preferred to http://terminology.hl7.org/ValueSet/diagnosis-role)
          38. Encounter.admission
          Control1..?
          40. Encounter.admission.admitSource
          Short入院来源
          Control1..?
          42. Encounter.location
          Short记录患者入院后所处的位置,一般记录到病床级。

          Guidance on how to interpret the contents of this table can be found here

          0. Encounter
          Definition

          An interaction between a patient and healthcare provider(s) for the purpose of providing healthcare service(s) or assessing the health status of a patient. Encounter is primarily used to record information about the actual activities that occurred, where Appointment is used to record planned activities.

          Short住院就诊服务本地化定义
          Control0..*
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate NamesVisit
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          2. Encounter.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

          Control0..1
          Typeid
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          4. Encounter.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. Encounter.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. Encounter.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingThe codes SHALL be taken from AllLanguages
          (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

          IETF language tag for a human language

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          10. Encounter.text
          Definition

          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          This element is affected by the following invariants: dom-6
          TypeNarrative
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. Encounter.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

          Control0..*
          This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
          TypeResource
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate Namesinline resources, anonymous resources, contained resources
          14. Encounter.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          16. Encounter.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
          Must Supportfalse
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          18. Encounter.identifier
          Definition

          Identifier(s) by which this encounter is known.

          ShortIdentifier(s) by which this encounter is known
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control1..*
          TypeIdentifier
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Encounter.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ system
          • 20. Encounter.identifier:BID
            Slice NameBID
            Definition

            Identifier(s) by which this encounter is known.

            Short住院记录业务表单编号
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control1..1
            TypeIdentifier
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            22. Encounter.identifier:BID.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            This element is affected by the following invariants: ele-1
            Typeid
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            24. Encounter.identifier:BID.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Encounter.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 26. Encounter.identifier:BID.use
              Definition

              The purpose of this identifier.

              Shortusual | official | temp | secondary | old (If known)
              Comments

              Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

              Control0..1
              BindingThe codes SHALL be taken from IdentifierUse
              (required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0)

              Identifies the purpose for this identifier, if known .

              Typecode
              Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              28. Encounter.identifier:BID.type
              Definition

              A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

              ShortDescription of identifier
              Comments

              This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from IdentifierTypeCodes
              (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

              A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows users to make use of identifiers when the identifier system is not known.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              30. Encounter.identifier:BID.system
              Definition

              Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

              ShortThe namespace for the identifier value
              Comments

              Identifier.system is always case sensitive.

              Control1..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

              Pattern Valueurn:uuid:2.16.156.10011.1.10
              Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              32. Encounter.identifier:BID.value
              Definition

              The portion of the identifier typically relevant to the user and which is unique within the context of the system.

              ShortThe value that is unique
              Comments

              If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

              Control0..1
              This element is affected by the following invariants: ident-1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Example<br/><b>General</b>:123456
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              34. Encounter.identifier:BID.period
              Definition

              Time period during which identifier is/was valid for use.

              ShortTime period when id is/was valid for use
              Control0..1
              TypePeriod
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              36. Encounter.identifier:BID.assigner
              Definition

              Organization that issued/manages the identifier.

              ShortOrganization that issued id (may be just text)
              Comments

              The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

              Control0..1
              TypeReference(Organization)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              38. Encounter.status
              Definition

              住院服务的状态。住院过程中状态值为in-progress,患者离开医院后状态值应该为discharged,病案归档后应为completed

              Short住院服务的状态
              Comments

              Note that internal business rules will determine the appropriate transitions that may occur between statuses (and also classes).

              Control1..1
              BindingThe codes SHALL be taken from EncounterStatus
              (required to http://hl7.org/fhir/ValueSet/encounter-status|5.0.0)

              Current state of the encounter.

              Typecode
              Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              40. Encounter.class
              Definition

              Concepts representing classification of patient encounter such as ambulatory (outpatient), inpatient, emergency, home health or others due to local variations.

              Short就诊活动的类型,固定为IMP(住院)
              Control1..1
              BindingThe codes SHOULD be taken from Encounter class
              (preferred to http://terminology.hl7.org/ValueSet/encounter-class)

              Classification of the encounter.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Pattern Value{
                "coding" : [{
                  "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
                  "code" : "IMP"
                }]
              }
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              42. Encounter.priority
              Definition

              Indicates the urgency of the encounter.

              ShortIndicates the urgency of the encounter
              Control0..1
              BindingFor example codes, see ActPriority
              (example to http://terminology.hl7.org/ValueSet/v3-ActPriority)

              Indicates the urgency of the encounter.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              44. Encounter.type
              Definition

              Specific type of encounter (e.g. e-mail consultation, surgical day-care, skilled nursing, rehabilitation).

              ShortSpecific type of encounter (e.g. e-mail consultation, surgical day-care, ...)
              Comments

              Since there are many ways to further classify encounters, this element is 0..*.

              Control0..*
              BindingFor example codes, see EncounterType
              (example to http://hl7.org/fhir/ValueSet/encounter-type)

              A specific code indicating type of service provided

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              46. Encounter.serviceType
              Definition

              Broad categorization of the service that is to be provided (e.g. cardiology).

              Short住院科室类型
              Control1..1
              BindingFor example codes, see ServiceType
              (example to http://hl7.org/fhir/ValueSet/service-type)
              TypeCodeableReference(HealthcareService)
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              48. Encounter.subject
              Definition

              The patient or group related to this encounter. In some use-cases the patient MAY not be present, such as a case meeting about a patient between several practitioners or a careteam.

              Short指向住院就诊活动中的患者
              Comments

              While the encounter is always about the patient, the patient might not actually be known in all contexts of use, and there may be a group of patients that could be anonymous (such as in a group therapy for Alcoholics Anonymous - where the recording of the encounter could be used for billing on the number of people/staff and not important to the context of the specific patients) or alternately in veterinary care a herd of sheep receiving treatment (where the animals are not individually tracked).

              Control1..1
              TypeReference(Patient, Group)
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Alternate Namespatient
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              50. Encounter.subjectStatus
              Definition

              The subjectStatus value can be used to track the patient's status within the encounter. It details whether the patient has arrived or departed, has been triaged or is currently in a waiting status.

              ShortThe current status of the subject in relation to the Encounter
              Comments

              Different use-cases are likely to have different permitted transitions between states, such as an Emergency department could use arrived when the patient first presents, then triaged once has been assessed by a nurse, then receiving-care once treatment begins, however other sectors may use a different set of these values, or their own custom set in place of this example valueset provided.

              Control0..1
              BindingFor example codes, see EncounterSubjectStatus
              (example to http://hl7.org/fhir/ValueSet/encounter-subject-status)

              Current status of the subject within the encounter.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              52. Encounter.episodeOfCare
              Definition

              Where a specific encounter should be classified as a part of a specific episode(s) of care this field should be used. This association can facilitate grouping of related encounters together for a specific purpose, such as government reporting, issue tracking, association via a common problem. The association is recorded on the encounter as these are typically created after the episode of care and grouped on entry rather than editing the episode of care to append another encounter to it (the episode of care could span years).

              ShortEpisode(s) of care that this encounter should be recorded against
              Control0..*
              TypeReference(EpisodeOfCare)
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. Encounter.basedOn
              Definition

              The request this encounter satisfies (e.g. incoming referral or procedure request).

              ShortThe request that initiated this encounter
              Control0..*
              TypeReference(CarePlan, DeviceRequest, MedicationRequest, ServiceRequest)
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate NamesincomingReferral
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              56. Encounter.careTeam
              Definition

              The group(s) of individuals, organizations that are allocated to participate in this encounter. The participants backbone will record the actuals of when these individuals participated during the encounter.

              ShortThe group(s) that are allocated to participate in this encounter
              Control0..*
              TypeReference(CareTeam)
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              58. Encounter.partOf
              Definition

              Another Encounter of which this encounter is a part of (administratively or in time).

              ShortAnother Encounter this encounter is part of
              Comments

              This is also used for associating a child's encounter back to the mother's encounter.

              Refer to the Notes section in the Patient resource for further details.

              Control0..1
              TypeReference(Encounter)
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              60. Encounter.serviceProvider
              Definition

              The organization that is primarily responsible for this Encounter's services. This MAY be the same as the organization on the Patient record, however it could be different, such as if the actor performing the services was from an external organization (which may be billed seperately) for an external consultation. Refer to the colonoscopy example on the Encounter examples tab.

              Short住院活动的责任机构,指向患者的就诊机构
              Control1..1
              TypeReference(Organization)
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              62. Encounter.participant
              Definition

              The list of people responsible for providing the service.

              ShortList of participants involved in the encounter
              Comments

              Any Patient or Group present in the participation.actor must also be the subject, though the subject may be absent from the participation.actor for cases where the patient (or group) is not present, such as during a case review conference.

              Control1..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              enc-1: A type must be provided when no explicit actor is specified (actor.exists() or type.exists())
              enc-2: A type cannot be provided for a patient or group participant (actor.exists(resolve() is Patient or resolve() is Group) implies type.exists().not())
              SlicingThis element introduces a set of slices on Encounter.participant. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ type
              • 64. Encounter.participant.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                66. Encounter.participant.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                68. Encounter.participant.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                70. Encounter.participant.type
                Definition

                Role of participant in encounter.

                ShortRole of participant in encounter
                Comments

                The participant type indicates how an individual actor participates in an encounter. It includes non-practitioner participants, and for practitioners this is to describe the action type in the context of this encounter (e.g. Admitting Dr, Attending Dr, Translator, Consulting Dr). This is different to the practitioner roles which are functional roles, derived from terms of employment, education, licensing, etc.

                Control0..*
                This element is affected by the following invariants: enc-1, enc-2
                BindingUnless not suitable, these codes SHALL be taken from ParticipantType
                (extensible to http://hl7.org/fhir/ValueSet/encounter-participant-type)

                Role of participant in encounter.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                72. Encounter.participant.period
                Definition

                The period of time that the specified participant participated in the encounter. These can overlap or be sub-sets of the overall encounter's period.

                ShortPeriod of time during the encounter that the participant participated
                Control0..1
                TypePeriod
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                74. Encounter.participant.actor
                Definition

                Person involved in the encounter, the patient/group is also included here to indicate that the patient was actually participating in the encounter. Not including the patient here covers use cases such as a case meeting between practitioners about a patient - non contact times.

                ShortThe individual, device, or service participating in the encounter
                Comments

                For planning purposes, Appointments may include a CareTeam participant to indicate that one specific person from the CareTeam will be assigned, but that assignment might not happen until the Encounter begins. Hence CareTeam is not included in Encounter.participant, as the specific individual should be assigned and represented as a Practitioner or other person resource.

                Similarly, Location can be included in Appointment.participant to assist with planning. However, the patient location is tracked on the Encounter in the Encounter.location property to allow for additional metadata and history to be recorded.

                The role of the participant can be used to declare what the actor will be doing in the scope of this encounter participation.

                If the individual is not specified during planning, then it is expected that the individual will be filled in at a later stage prior to the encounter commencing.

                Control0..1
                This element is affected by the following invariants: enc-1, enc-2
                TypeReference(Patient, Group, RelatedPerson, Practitioner, PractitionerRole, Device, HealthcareService)
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                76. Encounter.participant:AUT
                Slice NameAUT
                Definition

                The list of people responsible for providing the service.

                Short住院医师
                Comments

                Any Patient or Group present in the participation.actor must also be the subject, though the subject may be absent from the participation.actor for cases where the patient (or group) is not present, such as during a case review conference.

                Control1..1
                TypeBackboneElement
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                enc-1: A type must be provided when no explicit actor is specified (actor.exists() or type.exists())
                enc-2: A type cannot be provided for a patient or group participant (actor.exists(resolve() is Patient or resolve() is Group) implies type.exists().not())
                78. Encounter.participant:AUT.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                80. Encounter.participant:AUT.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                82. Encounter.participant:AUT.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                84. Encounter.participant:AUT.type
                Definition

                Role of participant in encounter.

                Short住院记录的作者,指代住院医师
                Comments

                The participant type indicates how an individual actor participates in an encounter. It includes non-practitioner participants, and for practitioners this is to describe the action type in the context of this encounter (e.g. Admitting Dr, Attending Dr, Translator, Consulting Dr). This is different to the practitioner roles which are functional roles, derived from terms of employment, education, licensing, etc.

                Control1..*
                This element is affected by the following invariants: enc-1, enc-2
                BindingUnless not suitable, these codes SHALL be taken from ParticipantType
                (extensible to http://hl7.org/fhir/ValueSet/encounter-participant-type)

                Role of participant in encounter.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Pattern Value{
                  "coding" : [{
                    "system" : "http://hl7.org/fhir/CodeSystem/encounter-participant-type",
                    "code" : "AUT"
                  }]
                }
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                86. Encounter.participant:AUT.period
                Definition

                The period of time that the specified participant participated in the encounter. These can overlap or be sub-sets of the overall encounter's period.

                ShortPeriod of time during the encounter that the participant participated
                Control0..1
                TypePeriod
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                88. Encounter.participant:AUT.actor
                Definition

                Person involved in the encounter, the patient/group is also included here to indicate that the patient was actually participating in the encounter. Not including the patient here covers use cases such as a case meeting between practitioners about a patient - non contact times.

                Short指向住院医师的引用
                Comments

                For planning purposes, Appointments may include a CareTeam participant to indicate that one specific person from the CareTeam will be assigned, but that assignment might not happen until the Encounter begins. Hence CareTeam is not included in Encounter.participant, as the specific individual should be assigned and represented as a Practitioner or other person resource.

                Similarly, Location can be included in Appointment.participant to assist with planning. However, the patient location is tracked on the Encounter in the Encounter.location property to allow for additional metadata and history to be recorded.

                The role of the participant can be used to declare what the actor will be doing in the scope of this encounter participation.

                If the individual is not specified during planning, then it is expected that the individual will be filled in at a later stage prior to the encounter commencing.

                Control0..1
                This element is affected by the following invariants: enc-1, enc-2
                TypeReference(Practitioner)
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                90. Encounter.appointment
                Definition

                The appointment that scheduled this encounter.

                ShortThe appointment that scheduled this encounter
                Control0..*
                TypeReference(Appointment)
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                92. Encounter.virtualService
                Definition

                Connection details of a virtual service (e.g. conference call).

                ShortConnection details of a virtual service (e.g. conference call)
                Comments

                There are two types of virtual meetings that often exist:

                • a persistent, virtual meeting room that can only be used for a single purpose at a time,
                • and a dynamic virtual meeting room that is generated on demand for a specific purpose.

                Implementers may consider using Location.virtualService for persistent meeting rooms.

                If each participant would have a different meeting link, an extension using the VirtualServiceContactDetail can be applied to the Encounter.participant BackboneElement.

                Control0..*
                TypeVirtualServiceDetail
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                94. Encounter.actualPeriod
                Definition

                The actual start and end time of the encounter.

                Short住院活动的起止时间
                Comments

                If not (yet) known, the end of the Period may be omitted.

                Control1..1
                TypePeriod
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                96. Encounter.plannedStartDate
                Definition

                The planned start date/time (or admission date) of the encounter.

                ShortThe planned start date/time (or admission date) of the encounter
                Control0..1
                TypedateTime
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                98. Encounter.plannedEndDate
                Definition

                The planned end date/time (or discharge date) of the encounter.

                ShortThe planned end date/time (or discharge date) of the encounter
                Control0..1
                TypedateTime
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                100. Encounter.length
                Definition

                Actual quantity of time the encounter lasted. This excludes the time during leaves of absence.

                When missing it is the time in between the start and end values.

                ShortActual quantity of time the encounter lasted (less time absent)
                Comments

                If the precision on these values is low (e.g. to the day only) then this may be considered was an all day (or multi-day) encounter, unless the duration is included, where that amount of time occurred sometime during the interval.

                May differ from the time in Encounter.period due to leave of absence(s).

                Control0..1
                TypeDuration
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                102. Encounter.reason
                Definition

                The list of medical reasons that are expected to be addressed during the episode of care.

                Short住院就诊的原因,一般可以罗列一些症状或问题
                Comments

                The reason communicates what medical problem the patient has that should be addressed during the episode of care. This reason could be patient reported complaint, a clinical indication that was determined in a previous encounter or episode of care, or some planned care such as an immunization recommendation. In the case where you have a primary reason, but are expecting to also address other problems, you can list the primary reason with a use code of 'Chief Complaint', while the other problems being addressed would have a use code of 'Reason for Visit'.

                Examples:

                • pregnancy would use HealthcareService or a coding as the reason
                • patient home monitoring could use Condition as the reason
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                104. Encounter.reason.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                106. Encounter.reason.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                108. Encounter.reason.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                110. Encounter.reason.use
                Definition

                What the reason value should be used as e.g. Chief Complaint, Health Concern, Health Maintenance (including screening).

                ShortWhat the reason value should be used for/as
                Control0..*
                BindingFor example codes, see EncounterReasonUse
                (example to http://hl7.org/fhir/ValueSet/encounter-reason-use)
                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                112. Encounter.reason.value
                Definition

                Reason the encounter takes place, expressed as a code or a reference to another resource. For admissions, this can be used for a coded admission diagnosis.

                Short住院就诊的原因,一般可以罗列一些症状或问题。可以指向一个记录了症状或问题的Condition资源,也可以直接以编码方式记录症状。
                Control1..1
                BindingThe codes SHOULD be taken from EncounterReasonCodes
                (preferred to http://hl7.org/fhir/ValueSet/encounter-reason)

                Reason why the encounter takes place.

                TypeCodeableReference(Condition, DiagnosticReport, Observation, ImmunizationRecommendation, Procedure)
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Alternate NamesIndication, Admission diagnosis
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                114. Encounter.diagnosis
                Definition

                The list of diagnosis relevant to this encounter.

                Short住院诊断。最少应填写一个入院诊断。
                Comments

                Also note that for the purpose of billing, the diagnoses are recorded in the account where they can be ranked appropriately for how the invoicing/claiming documentation needs to be prepared.

                Control1..*
                TypeBackboneElement
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                116. Encounter.diagnosis.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                118. Encounter.diagnosis.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                120. Encounter.diagnosis.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                122. Encounter.diagnosis.condition
                Definition

                The coded diagnosis or a reference to a Condition (with other resources referenced in the evidence.detail), the use property will indicate the purpose of this specific diagnosis.

                Short住院诊断,可以指向一个记录了诊断的Condition资源,也可以直接以编码方式表示诊断。
                Control1..1
                BindingFor example codes, see ConditionProblemDiagnosisCodes
                (example to http://hl7.org/fhir/ValueSet/condition-code)
                TypeCodeableReference(Condition)
                Is Modifierfalse
                Must Supportfalse
                Summarytrue
                Alternate NamesAdmission diagnosis, discharge diagnosis, indication
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                124. Encounter.diagnosis.use
                Definition

                Role that this diagnosis has within the encounter (e.g. admission, billing, discharge …).

                Short住院诊断类型。例如:入院诊断、出院诊断、手术诊断等
                Control1..1
                BindingThe codes SHOULD be taken from DiagnosisRole
                (preferred to http://terminology.hl7.org/ValueSet/diagnosis-role)
                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                126. Encounter.account
                Definition

                The set of accounts that may be used for billing for this Encounter.

                ShortThe set of accounts that may be used for billing for this Encounter
                Comments

                The billing system may choose to allocate billable items associated with the Encounter to different referenced Accounts based on internal business rules.

                Control0..*
                TypeReference(Account)
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                128. Encounter.dietPreference
                Definition

                Diet preferences reported by the patient.

                ShortDiet preferences reported by the patient
                Comments

                For example, a patient may request both a dairy-free and nut-free diet preference (not mutually exclusive).

                Control0..*
                BindingFor example codes, see EncounterDiet
                (example to http://hl7.org/fhir/ValueSet/encounter-diet)

                Medical, cultural or ethical food preferences to help with catering requirements.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Requirements

                Used to track patient's diet restrictions and/or preference. For a complete description of the nutrition needs of a patient during their stay, one should use the nutritionOrder resource which links to Encounter.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                130. Encounter.specialArrangement
                Definition

                Any special requests that have been made for this encounter, such as the provision of specific equipment or other things.

                ShortWheelchair, translator, stretcher, etc
                Control0..*
                BindingThe codes SHOULD be taken from SpecialArrangements
                (preferred to http://hl7.org/fhir/ValueSet/encounter-special-arrangements)

                Special arrangements.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                132. Encounter.specialCourtesy
                Definition

                Special courtesies that may be provided to the patient during the encounter (VIP, board member, professional courtesy).

                ShortSpecial courtesies (VIP, board member)
                Comments

                Although the specialCourtesy property can contain values like VIP, the purpose of this field is intended to be used for flagging additional benefits that might occur for the patient during the encounter.

                It could include things like the patient is to have a private room, special room features, receive a friendly visit from hospital adminisitration, or should be briefed on treatment by senior staff during the stay.

                It is not specifically intended to be used for securing the specific record - that is the purpose of the security meta tag, and where appropriate, both fields could be used.

                Control0..*
                BindingThe codes SHOULD be taken from SpecialCourtesy
                (preferred to http://hl7.org/fhir/ValueSet/encounter-special-courtesy)

                Special courtesies.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                134. Encounter.admission
                Definition

                Details about the stay during which a healthcare service is provided.

                This does not describe the event of admitting the patient, but rather any information that is relevant from the time of admittance until the time of discharge.

                ShortDetails about the admission to a healthcare service
                Comments

                An Encounter may cover more than just the inpatient stay. Contexts such as outpatients, community clinics, and aged care facilities are also included.

                The duration recorded in the period of this encounter covers the entire scope of this admission record.

                Control1..1
                TypeBackboneElement
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                136. Encounter.admission.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                138. Encounter.admission.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                140. Encounter.admission.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                142. Encounter.admission.preAdmissionIdentifier
                Definition

                Pre-admission identifier.

                ShortPre-admission identifier
                Control0..1
                TypeIdentifier
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                144. Encounter.admission.origin
                Definition

                The location/organization from which the patient came before admission.

                ShortThe location/organization from which the patient came before admission
                Control0..1
                TypeReference(Location, Organization)
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                146. Encounter.admission.admitSource
                Definition

                From where patient was admitted (physician referral, transfer).

                Short入院来源
                Control1..1
                BindingThe codes SHOULD be taken from AdmitSource
                (preferred to http://hl7.org/fhir/ValueSet/encounter-admit-source)

                From where the patient was admitted.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                148. Encounter.admission.reAdmission
                Definition

                Indicates that this encounter is directly related to a prior admission, often because the conditions addressed in the prior admission were not fully addressed.

                ShortIndicates that the patient is being re-admitted
                Control0..1
                BindingFor example codes, see hl7VS-re-admissionIndicator
                (example to http://terminology.hl7.org/ValueSet/v2-0092)

                The reason for re-admission of this admission encounter.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                150. Encounter.admission.destination
                Definition

                Location/organization to which the patient is discharged.

                ShortLocation/organization to which the patient is discharged
                Control0..1
                TypeReference(Location, Organization)
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                152. Encounter.admission.dischargeDisposition
                Definition

                Category or kind of location after discharge.

                ShortCategory or kind of location after discharge
                Control0..1
                BindingFor example codes, see DischargeDisposition
                (example to http://hl7.org/fhir/ValueSet/encounter-discharge-disposition)

                Discharge Disposition.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                154. Encounter.location
                Definition

                List of locations where the patient has been during this encounter.

                Short记录患者入院后所处的位置,一般记录到病床级。
                Comments

                Virtual encounters can be recorded in the Encounter by specifying a location reference to a location of type "kind" such as "client's home" and an encounter.class = "virtual".

                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                156. Encounter.location.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                158. Encounter.location.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                160. Encounter.location.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                162. Encounter.location.location
                Definition

                The location where the encounter takes place.

                ShortLocation the encounter takes place
                Control1..1
                TypeReference(Location)
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                164. Encounter.location.status
                Definition

                The status of the participants' presence at the specified location during the period specified. If the participant is no longer at the location, then the period will have an end date/time.

                Shortplanned | active | reserved | completed
                Comments

                When the patient is no longer active at a location, then the period end date is entered, and the status may be changed to completed.

                Control0..1
                BindingThe codes SHALL be taken from EncounterLocationStatus
                (required to http://hl7.org/fhir/ValueSet/encounter-location-status|5.0.0)

                The status of the location.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                166. Encounter.location.form
                Definition

                This will be used to specify the required levels (bed/ward/room/etc.) desired to be recorded to simplify either messaging or query.

                ShortThe physical type of the location (usually the level in the location hierarchy - bed, room, ward, virtual etc.)
                Comments

                This information is de-normalized from the Location resource to support the easier understanding of the encounter resource and processing in messaging or query.

                There may be many levels in the hierachy, and this may only pic specific levels that are required for a specific usage scenario.

                Control0..1
                BindingFor example codes, see LocationForm
                (example to http://hl7.org/fhir/ValueSet/location-form)

                Physical form of the location.

                TypeCodeableConcept
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                168. Encounter.location.period
                Definition

                Time period during which the patient was present at the location.

                ShortTime period during which the patient was present at the location
                Control0..1
                TypePeriod
                Is Modifierfalse
                Must Supportfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))